HRD 100M
The HRD 100M pumps are cast iron jet pumps for clean water. The HRD jet pumps are self-priming and capable of handling air. These properties make the pumps extremely suitable for sucking up water from a lower level, such as a groundwater or cistern. This pump is also suitable as a small irrigation pump.
In addition to their air handling properties, these jet pumps also have the capability to deliver a relatively high pressure. As a result, they are also used for lighter pressure applications. For example, applications that require a little more pressure than than what the water supply network provides as standard.
The HRD 100M pumps are equipped with fully corrosion resistant solids. They are very suitable as hobby pumps for the applications as described above but can also be used in industry and horticulture. Here, they are mainly used as a small pressure booster. For example, the water supply equipped with machines that require a small amount of water, but require a slightly higher pressure.
TECHNICAL SPECIFICATIONS
The pumps can pump clean water with a maximum medium temperature of 70 °C. Partly due to this temperature, the pump makes it possible to pump liquids with a higher temperature.
Kin Pumps jet pumps are available in 3 designs, the CMD (stainless steel), TCH (synthetic) and the HRD (cast iron). They have a maximum capacity of 90 l/min (5.4 m³/h) and a maximum pressure of 32 mwk (3.2 bar) and 44 mwk (4.4 bar) respectively.
The largest version, the Multirain Jet 5, delivers even up to 100 l/min (6 m³/h) and a maximum pressure of 54 mwk (5.4 bar). The Multirain jet pumps are made entirely of corrosion-resistant materials and are part of the multi-stage pump segment.
TECHNICAL FEATURES
Pump
Material:
Shaft seal:
Impeller Type:
Connection:
Max. liquid temperature:
Max. ambient temperature:
Protection class:
Weight:
Cast iron with stainless steel impeller
Mechanical seal, Car/Cer/NBR
Closed
1" female thread
70 °C
50 °C
IP55
± 16.6 kg
Incl. on/off switch
Engine
Voltage:
Power:
Maximum current:
Speed:
Cable length:
Insulation class:
Capacitor:
230 v, 50 Hz
1.0 kW
6.2 A
2900 rpm
1.5 m
F
30 µF / 450V
Built-in automatic thermal protection (single-phase only)
Suitable for continuous use
BKL 1.0 M/VV
The BKL 1.0 M/VV is a compact, robust waste water pump with a vortex impeller and special float switch, ideal for shipping, agriculture, and industry.
Check it outBecome a Dealer of kin pumps
Would you, as a supplier, like to develop a new brand within the pump sector together with Kin Pumps? Then we would like to get in touch with you to discuss our cooperation.
Contact us
