![](https://cdn.prod.website-files.com/66436235fcfaa01ebff3ecbf/664c804b0e773939d07da07b_TCH.webp)
TCH 100
The TCH 100 pumps are plastic jet pumps for clean water. These jet pumps are self-priming and therefore have the characteristic of being able to handle air. This makes them extremely suitable for use in garden irrigation where water has to be sucked up from a lower level. For example, a groundwater well. The jet pumps deliver a relatively high pressure so that they can also be used for lighter pressure applications. For example, when the pressure from the water supply network is not sufficient. The TCH 100, as standard, is equipped with a handle, cable with plug and an on/off switch.
The TCH 100 pumps are equipped with fully corrosion resistant solid materials and is very suitable as a hobby pump, such as garden irrigation and small rainwater reuse applications. This pump is also used in industry and horticulture where they are used as a small pressure booster. For example, the water supply equipped with machines that require a small amount of water, but require a slightly higher pressure.
TECHNICAL SPECIFICATIONS
The pumps can pump clean water with a maximum medium temperature of 70 °C. Partly due to this temperature, the pump makes it possible to pump liquids with a higher temperature.
Kin Pumps jet pumps are available in 3 designs, the CMD (stainless steel), TCH (synthetic) and the HRD (cast iron). They have a maximum capacity of 90 l/min (5.4 m³/h) and a maximum pressure of 32 mwk (3.2 bar) and 44 mwk (4.4 bar) respectively.
The largest version, the Multirain Jet 5, delivers even up to 100 l/min (6 m³/h) and a maximum pressure of 54 mwk (5.4 bar). The Multirain jet pumps are made entirely of corrosion-resistant materials and are part of the multi-stage pump segment.
![](https://cdn.prod.website-files.com/66436235fcfaa01ebff3ecbf/664c83a804cc9f6baabefb45_TCH-100-tabel.png)
TECHNICAL FEATURES
Pump
Material:
Shaft seal:
Impeller Type:
Connection:
Max. liquid temperature:
Max. ambient temperature:
Protection class:
Weight:
Plastic
mechanical seal, Car/Cer/NBR
Closed
1" female thread
70 °C
50 °C
IP55
± 12 kg
Incl. on/off switch
Engine
Voltage:
Power:
Maximum current:
Speed:
Cable length:
Insulation class:
Capacitor:
230 v, 50 Hz
1.0 kW
6.2 A
2900 rpm
1.5 m
F
30 µF / 450V
Built-in automatic thermal protection (single-phase only)
Suitable for continuous use
Become a Dealer of kin pumps
Would you, as a supplier, like to develop a new brand within the pump sector together with Kin Pumps? Then we would like to get in touch with you to discuss our cooperation.
Contact us![](https://cdn.prod.website-files.com/6630e746b843f4fb49f3199d/66431b081f14c8f409684eff_call-to-action-kin.png)