hrd 100

The HRD 100 pumps are cast iron jet pumps for clean water. The HRD jet pumps are self-priming and capable of handling air. These properties make the pumps extremely suitable for sucking up water from a lower level, such as a groundwater or cistern. This pump is also suitable as a small irrigation pump. 

In addition to their air handling properties, these jet pumps also have the capability to deliver a relatively high pressure. As a result, they are also used for lighter pressure applications. For example, applications that require a little more pressure than than what the water supply network provides as standard. 

The HRD 100 pumps are equipped with fully corrosion resistant solids. They are very suitable as hobby pumps for the applications as described above but can also be used in industry and horticulture. Here, they are mainly used as a small pressure booster. For example, the water supply equipped with machines that require a small amount of water, but require a slightly higher pressure.

hrd 100

Technical Properties

pump

  • Material: Cast iron with stainless steel impeller
  • Shaft seal: mechanical seal, Car/Cer/NBR
  • Impeller Type: Closed
  • Connection: 1" female thread
  • Max. liquid temperature: 70 °C
  • Max. ambient temperature: 50 °C
  • Protection class: IP55
  • Weight: ± 16.6 kg

Incl. on/off switch

Engine

  • Voltage: 230 v, 50 Hz
  • Power: 1.0 kW
  • Maximum current: 6.2 A
  • Speed: 2900 rpm
  • Cable length: 1.5 m
  • Insulation class: F
  • Capacitor: 30 µF / 450V

Built-in automatic thermal protection (single-phase only)

Suitable for continuous use

hrd 100 grafiek

accessories

Productfoto Expansie Kit

expansion kit

Productfoto Pompconsole

pump console

Productfoto Zuigslangset staand

Suction hose set

Productfoto Voorfilter

pre-filter

related products

CMD 100

cmd 100

TCH 100

tch 100

multirain jet

multirain jet 3

multirain jet

multirain jet 4